Server comparison chart

Server type	Portable	Pro4	Pro8
Sensor capacity (RJ45)	Up to 4x 3D cameras* Up to 10x 2D LiDARs*	Up to 4x 3D cameras* Up to 12x 2D LiDARs*	Up to 8x 3D cameras* Up to 24x 2D LiDARs*
“Input” Network interface	4x POE ports / RJ45 / 1Gb 1x RJ45 / 1Gb	4x POE ports / RJ45 / 1Gb	8x POE ports / RJ45 / 1Gb
“Output” Network interface	RJ45 / 1Gb	RJ45 / 2.5Gb*	RJ45 / 2.5Gb*
Processing power	Designed to track approx. up to 25 people with standard quality	Designed to track approx. up to 40 people with standard quality	Designed to track approx. up to 80 people with standard quality
Fan noise	Noisy on high load	Very low	Very low
Size		4U rack / 427 x 177 x 450 mm	4U rack / 427 x 177 x 450 mm
Weight		~15kg	~15kg

*Using network above 1Gb is useful only if you stream point clouds (volumetric capture feature)

*Max 1x 3D camera or up to 2-3x 2D LiDAR per port, more than 1 LiDAR per port requires a standard switch.

💡

Understanding processing power : You will always be able to setup your server in a way that it works in most cases for any amount of people. The number of people provided in the “processing power” chart are values for good quality data, which means a decent fluidity and precision. Each server has a different processing power capability, that is used for the processing of data. Depending on the parameters and settings, the server will use the availbale processing power before lowering down the output data per second when reaching max capacity. Depending on the number of people seen by the sensor, the server will use more processing power. If you use the volumetric capture capabilities, it uses more processing power than standard tracking.